Cart

Cart

Updates
  • Free Shipping Above $100
{"effect":"fade","fontstyle":"normal","autoplay":"true","timer":4000}

ANKLET SIZING GUIDE

1.    Choose your Anklet size
  • Your perfect Anklet length depends on your preference – Consider the anklet is not too tight to avoid any damage to the skin due to pressure when moving.
  • Loose fit – Wear the anklet loose, so it hangs down and moves more while walking.
  • Snug fit – Wear the anklet short, so it does not move too much while walking.
  • Verify anklet length – Measure the circumference of your ankle, using a measuring tape or with a ribbon.
1.    Measure using a Ribbon / Thread
  • Using a ribbon or thread, measure the preferred position of your ankle where you would like your anklet.
  • Place the ribbon or thread on a ruler / measuring tape to find the circumference in inches and compare this to the length of the anklet of your choice.
  • If your anklet size, falls between two sizes, consider the larger size to avoid cuts.
  • Tip – Avoid using elastic / stretchy material for measuring, which can yield inaccurate measurements.

BANGLE / BANGLE BRACELET SIZING GUIDE

Method 1 – Measure your Hand using Thread & Measuring Tape
  • Bring your thumb and little finger together and measure where your hand is the widest as shown in the picture.
Bangle Size Circumference
  Inches MM
2-2 6.67 169.4
2-4 7.06 179.6
2-6 7.46 189.5
2-8 7.85 199.4
2-10 8.24 209.3
2-12 8.64 219.5
2-14 9.03 229.4
3 9.42 239.3
Method 2  – Measure the inner diameter of a bangle that you already own
  • Using a bangle, you already own, measure the inner diameter with a ruler, and then use the chart to select a bangle size.
Bangle Size Diameter
  Inches MM
2-2 2.125 54
2-4 2.25 57.2
2-6 2.375 60.3
2-8 2.5 63.5
2-10 2.625 66.7
2-12 2.75 69.9
2-14 2.875 73
3 3 76.3

RING SIZING GUIDE

1.    Measure your finger size using Ribbon / Thread
  • Using a ribbon or thread to measure the area that will be occupied by the ring.
  • On complete circle around your finger, make a mark on ribbon or string.
Ring Size Circumference
  Inches MM
1 1.61 41.01
2 1.64 42.70
3 1.69 42.90
4 1.72 43.60
5 1.76 44.80
6 1.81 46.10
7 1.87 47.40
8 1.89 48.00
9 1.92 48.70
10 1.97 50.00
11 2.02 51.20
12 2.04 51.90
13 2.09 53.10
14 2.14 54.40
15 2.02 55.10
16 2.22 56.30
17 2.24 57.00
18 2.30 58.30
19 2.32 58.90
20 2.37 60.20
21 2.39 60.80
22 2.44 62.10
23 2.47 62.70
24 2.52 64.00
25 2.54 64.60
26 2.59 65.90
27 2.65 67.20
28 2.67 67.80
29 2.72 69.10
30 2.80 71.00
     
Ring Size Circumference
  Inches MM
1 1.61 41.01
2 1.64 42.70
3 1.69 42.90
4 1.72 43.60
5 1.76 44.80
6 1.81 46.10
7 1.87 47.40
8 1.89 48.00
9 1.92 48.70
10 1.97 50.00
11 2.02 51.20
12 2.04 51.90
13 2.09 53.10
14 2.14 54.40
15 2.02 55.10
                 
Ring Size Circumference
  Inches MM
16 2.22 56.30
17 2.24 57.00
18 2.30 58.30
19 2.32 58.90
20 2.37 60.20
21 2.39 60.80
22 2.44 62.10
23 2.47 62.70
24 2.52 64.00
25 2.54 64.60
26 2.59 65.90
27 2.65 67.20
28 2.67 67.80
29 2.72 69.10
30 2.80 71.00
1.    Measure inside diameter of existing ring
  • Measures inside the diameter of your existing ring that fits you, in millimeters.
  • Place the ring on a ruler as shown in picture below.
Ring Size Diameter
  Inches MM
1 0.51 13.1
2 0.52 13.3
3 0.54 13.7
4 0.55 13.9
5 0.56 14.3
6 0.58 14.7
7 0.59 15.1
8 0.60 15.3
9 0.61 15.5
10 0.63 15.9
11 0.64 16.3
12 0.65 16.5
13 0.67 16.9
14 0.68 17.3
15 0.69 17.5
Ring Size Diameter
  Inches MM
16 0.71 17.9
17 0.71 18.1
18 0.73 18.5
19 0.74 18.8
20 0.75 19.2
21 0.76 19.4
22 0.78 19.8
23 0.79 20.0
24 0.80 20.4
25 0.81 20.6
26 0.83 21.0
27 0.84 21.4
28 0.85 21.6
29 0.87 22.0
30 0.88 22.3

BRACELET SIZING GUIDE

1.    Choose your Bracelet size
  • Your perfect Bracelet length depends on your preference – Consider the Bracelet is not too tight to avoid any damage to the skin due to pressure.
  • Loose fit –Add 1 to 1 ¼ cm.
  • Snug fit – Add ¼ to ½ cm.
  • Comfort fit – Add ¾ to 1 cm.
1.    Measure using a Ribbon / Thread for Tennis / Wrap-Around bracelets
  • Using a ribbon or thread, measure the preferred position of your wrist where you would like your bracelet, below your wrist bone.
  • Mark the ribbon or thread, with a pen, where the end of the bracelet needs to be.
  • Place the ribbon or thread on a ruler / measuring tape to find the measurement in inches and compare this to the length of the Bracelet of your choice.
  • If your Bracelet size, falls between two sizes, consider the larger size to avoid cuts.
    Tip – Avoid using elastic / stretchy material for measuring, which can yield inaccurate measurements.
1.    Measure using a Ribbon / Thread for Tennis / Wrap-Around bracelets
  • Please refer to Bangle Sizing guide for this.

NECKLACE SIZING GUIDE

1.    Choose your Necklace Length
  • Your perfect Necklace length depends on your preference and style .