BANGLE / BANGLE BRACELET SIZING GUIDE
Method 1 – Measure your Hand using Thread & Measuring Tape
Bring your thumb and little finger together and measure where your hand is the widest as shown in the picture.
| Bangle Size | Diameter (Inches) | Diameter (MM) |
| 2-2 | 6.67 | 169.4 |
| 2-4 | 7.06 | 179.6 |
| 2-6 | 7.46 | 189.5 |
| 2-8 | 7.85 | 199.4 |
| 2-10 | 8.24 | 209.3 |
| 2-12 | 8.64 | 219.5 |
| 2-14 | 9.03 | 229.4 |
| 3 | 9.42 | 239.3 |
Method 2 – Measure the inner diameter of a bangle that you already own
Using a bangle, you already own, measure the inner diameter with a ruler, and then use the chart to select a bangle size.
| Bangle Size | Diameter (Inches) | Diameter (MM) |
| 2-2 | 2.125 | 54 |
| 2-4 | 2.25 | 57.2 |
| 2-6 | 2.375 | 60.3 |
| 2-8 | 2.5 | 63.5 |
| 2-10 | 2.625 | 66.7 |
| 2-12 | 2.75 | 69.9 |
| 2-14 | 2.875 | 73 |
| 3 | 3 | 76.3 |
BRACELET SIZING GUIDE
1. Choose your Bracelet size
- Your perfect Bracelet length depends on your preference – Consider the Bracelet is not too tight to avoid any damage to the skin due to pressure.
- Loose fit –Add 1 to 1 ¼ cm.
- Snug fit – Add ¼ to ½ cm.
- Comfort fit – Add ¾ to 1 cm.
2. Measure using a Ribbon / Thread for Tennis / Wrap-Around bracelets
- Using a ribbon or thread, measure the preferred position of your wrist where you would like your bracelet, below your wrist bone.
- Mark the ribbon or thread, with a pen, where the end of the bracelet needs to be.
- Place the ribbon or thread on a ruler / measuring tape to find the measurement in inches and compare this to the length of the Bracelet of your choice.
- If your Bracelet size, falls between two sizes, consider the larger size to avoid cuts.
Tip – Avoid using elastic / stretchy material for measuring, which can yield inaccurate measurements.